How do you install Ledgestone on a wall?

Creating a super cool accent wall in your room can make everything look way more awesome! One of the best ways to do that is by using Ledgestone. It has a rough and natural look that’s perfect if you want your room to feel cozy or super fancy. At Wall Mastery, the top accent wall company in Florida, we’re pros at turning boring walls into amazing accent walls. Here’s how you can install Ledgestone on a wall and make it look fantastic.

What’s Ledgestone All About?

Before we jump into the steps, let’s talk about Ledgestone. It’s a type of stone that looks like a bunch of small stones stacked together, which makes it perfect for an accent wall. Even though it’s not as thick as real stone, it still gives you that awesome stone wall look, but it’s way easier to put up.

Stuff You’ll Need

Here’s what you’ll need to make your Ledgestone accent wall:

• Ledgestone veneers (pick a color that looks cool in your room)
• Mortar (special glue for stones)
• Trowel (to spread the mortar)
• Level (to make sure everything’s straight)
• Tape measure (to measure your wall)
• Chalk line (to mark where to put the stones)
• Wet saw or angle grinder (to cut the stones)
• Notched trowel (to put the mortar on the wall)
• Ledgestone adhesive (for extra sticking power)
• Grout (if you want to fill in between the stones)
• Grout bag (to squeeze the grout into the spaces)
• Brush (to clean off any extra mortar or grout)

Step 1: Getting the Wall Ready

First things first, you need to prep the wall for your accent wall. It doesn’t matter if you’re putting Ledgestone on drywall, concrete, or something else—you need to make sure the wall is clean and ready to go.

• Clean the Wall: Get rid of any dirt or dust. If you’re working with drywall, rough it up a bit so the mortar sticks better.
• Use a Vapor Barrier: If your wall is in a spot that gets wet, like outside or in a bathroom, you’ll need a vapor barrier to keep the moisture out.
• Add Metal Lath (If Needed): On some walls, you might need to put up a metal lath first so the stones stick better. Just nail or screw it in place.

Step 2: Planning Your Layout

To make your accent wall look perfect, you’ll need to plan how you’re going to put the stones up.

• Measure the Wall: Use your tape measure to see how big your wall is. This helps you figure out how many stones you’ll need.
• Mark Your Lines: Use a chalk line to draw some straight lines on the wall. These lines will help you keep the stones straight.
• Lay Out the Stones: Before you start gluing anything, lay the stones out on the floor in front of the wall. This way, you can see how they’ll look and make any changes before you start.

Step 3: Putting on the Mortar

Now that you’ve planned it all out, it’s time to start putting the stones on your accent wall!

• Mix the Mortar: Follow the instructions to mix your mortar. It should be thick, like peanut butter.
• Spread the Mortar: Using the notched trowel, spread some mortar on the wall. Start at the bottom and work your way up.
• Back Butter the Stones: For a super strong hold, spread a little mortar on the back of each stone before sticking it to the wall.

Step 4: Installing the Ledgestone

Now comes the fun part—putting up the stones on your accent wall!

• Start at the Bottom: Begin at the bottom corner and press each stone firmly into the mortar. Use a level to make sure the stones are straight.
• Stagger the Stones: Make sure the lines between the stones don’t match up perfectly. This makes your accent wall look more natural.
• Cut Stones When Needed: If you need to fit stones around corners or outlets, use the wet saw to cut them to the right size. Be careful and always wear safety gear!

Step 5: Adding Grout (If You Want)

Some people like the look of stones without any spaces between them, but if you want to add grout, here’s how you do it.

• Mix the Grout: Follow the instructions to mix the grout.
• Apply the Grout: Use the grout bag to squeeze the grout into the spaces between the stones.
• Clean Up: After the grout is in place, use a brush to clean off any extra.

Step 6: Final Touches

You’re almost done with your accent wall! Here’s how to finish it up:

• Seal the Stones (Optional): If your accent wall is in a spot where it might get dirty or wet, you might want to seal the stones.
• Clean the Wall: Use a soft brush to dust off the stones.
• Decorate: Now that your accent wall is done, you can decorate it with cool stuff like pictures or lights!

Why Choose Wall Mastery?

At Wall Mastery, we’re experts at creating awesome accent walls in Florida. We know exactly how to deal with the weather and make your walls look amazing. Whether you want a cozy living room or a jaw-dropping entryway, we can help you out. Contact us today and let’s make your accent wall dreams come true!

By following this guide, you’ll have a stunning Ledgestone accent wall that makes your room look amazing. And remember, if you’d rather have the pros do it, Wall Mastery is always here to help with your accent wall needs!